Menu
DMC 3000 is a personal electronic radiation dosimeter, the best-selling dosimeter in the world, which represents over 25 years of innovation.
CHARACTERISTICS
• Designed for strength and durability.
• Powerful audible alarms, coupled with ultra-bright LEDs and vibration capability.
• Easy operation with 2 buttons and navigation of the display options.
• Meets or exceeds applicable IEC and ANSI standards.
• Works for up to 9 months on a single standard AAA battery.
DESCRIPTION
The personal electronic dosimeter DMC 3000 represents over 25 years in innovation, in electronic dosimetry. It has a superior gamma and X-ray energy response, programmable visual LED alarms, audible and vibrating alarm indicators, easy 2-button navigation and the ability to be equipped with external modules for extended capabilities.
The DMC 3000 dosimeter has a complete line of attachable modules that extend the detection and communication capabilities of the dosimeter.
Instantly measure beta radiation with the DMC 3000 Hp Beta monitoring module (0.07).
CHARACTERISTICS
• Hp (0.07) and wide range of Beta radiation measurements
• High efficiency Beta measurement
• Higher energy response at Hp (0.07)
• Plug and play
• Meets or exceeds applicable IEC and ANSI standards
• Excellent EMC immunity
• Designed for strength and durability
DESCRIPTION
The additional Beta module attaches to the DMC 3000 dosimeter and provides Hp (0.07) with a wide range of beta radiation measurements. Beta measurement, display, alarms and Hp (0.07) are highly visible on the LCD display. It is powered by the DMC 3000 unit.
Keep track of workers’ exposure to Neutrons with the DMC 3000 Neutron Module.
CHARACTERISTICS
• Full coverage of the Neutron energy range
• Rejection of Gamma radiation in the Neutron channel
• Meets or exceeds applicable IEC and ANSI standards
• Designed for strength and durability
• Plug and play (connect and use)
• Excellent EMC immunity
• IP67 waterproof
• Removing the module when not needed
DESCRIPTION
The additional Neutron module attaches to the DMC 3000 dosimeter and offers a wide range of Hp Neutron measurements (10). Hp Neutron measurement, display and alarms (10) are highly visible on the LCD display. The module is powered by the DMC 3000.
Connects the DMC 3000 to the WRM2 ™ wireless monitoring network.
CHARACTERISTICS
• Transmits radiological information at preconfigured intervals to WRM2 telemetry receivers
• Low power optimized for long life
• Optional Bluetooth connection for communication with additional alarm accessories
• 900 MHz and 2.4 GHz options
• Battery type: AAA (LR03 1.5v)
• External power supply: 1.5V-3.6V through the battery adapter
• Battery life:> 40 hours
DESCRIPTION
The additional telemetry module is attached to the DMC 3000 dosimeter and allows the transmission of radiological data of a worker to the WRM2 base station and remote monitoring software. The telemetry module also allows additional connected accessories such as heart rate monitor and alarm accessories. Extra power allows 40+ hours of continuous use.
Remote monitoring software for remote monitoring of DMC 3000 dosimeters equipped with telemetry modules.
CHARACTERISTICS
• Loud alarm, 85 dB (A)
• Browser-based remote monitoring application Cross-browser-TCP / IP support for multiple sessions
• Network or standalone
• Intranet with security support
• There is no requirement for the workstation database
• Supports multiple telemetry data protocols
• Access control connectivity for automatic authentication features
• GPS supported, with overlapping map view
• User configurable for greater flexibility and comfort
• Emergency planning perimeter monitoring system (real-time monitoring of limits / offsites for radiation protection teams)
• Monitors over 1000 devices
DESCRIPTION
TeleView 3000 software is Mirion’s flagship remote monitoring application. Completely redesigned for the next generation of radiation protection support, it builds on familiar features expected from remote monitoring software (e.g., grouping workers by RWP (radiation work permit), automatically connecting workers via the Control link access, area monitor grouping, etc.) and adds updated features such as multi-window viewing and GPS overlay functionality.
The key to redesigning the TeleView 3000 is its state-of-the-art, browser-based data representation (a significant improvement over outdated client / server architecture). This browser functionality allows users to access data in an easy-to-use and familiar format from virtually any networked workstation, whether it’s a PC, a tablet, or even a smartphone. Because each page of TeleView 3000 software data is a separate session, any job coverage resource is now able to simultaneously monitor worker groups, track alarms, reference data, view live data on a Google map ™ and more, without draining your computer processor.
Its revolutionary cross-browser-TCP / IP structure means that there is no client installation on workstations Radiation protection – which in turn means that there is no database on workstations. Therefore, once the system base is installed, someone covering a job simply launches a browser session and starts monitoring in their own custom workspace.
Of course, the TeleView 3000 software includes the ability to monitor over 1000 WRM2 devices, supports multiple wireless protocols (e.g., WRM2 device, RAMSYS products, RadNet, etc.), and perfect links to access control systems. example, Sentinel ™, DosiServ software ™, etc.), and can be endlessly customized for individual familiarity. Simply put, TeleView 3000 software makes remote monitoring easier, more flexible and more intuitive to use.
Welcome to the era of Redefined and Improved Remote Radiation Monitoring!
AWM Adaptive Wireless Monitor is a new dynamic remote monitoring system that is now an ALL-in-ONE solution for the nuclear industry.
CHARACTERISTICS
• Adaptable to a wide range of radiation monitors and other measuring devices
• WRM2 Sistem system, Wi-Fi, Bluetooth and GPS capability
• Touch screen interface allows field configuration
• Power-over-Ethernet
• Backup> 8 hours
DESCRIPTION
This compact system can be implemented as a base station, MESH repeater, external transmission device, active diving repeater, etc.
AWM includes an RS-232 communication port, USB communication port, Power-over-Ethernet (POE) or Wi-Fi. The AWM uses a color touch screen for on-screen configurations.
ADDITIONAL INFORMATION
The AWM monitor can communicate with the following devices:
• Monitor ABPM-203m ™
• iCAM Monitor ™
• Q-Temp Monitor ™ (model 34 or later)
• Oxygen sensor
• Active underwater diving antenna
• AMP-50/100/200 monitors
• Tritium monitors
• Monitor ABM-203P ™
• Continuous air monitor (CAM) from another supplier
AWM includes an RS-232 communication port, USB communication port, Power-over-Ethernet (POE) or Wi-Fi. The AWM uses a color touch screen for on-screen configurations.
Allows remote monitoring with WRM2 compatible devices.
CHARACTERISTICS
• Provides real-time readings and statuses of units equipped with transmitters operating in an area.
• Allows a supervisor outside a radiation work area to be instantly alerted to alarm conditions inside.
• Compact and robust equipment for indoor or outdoor applications.
• Range of approximately 2000 meters, extendable with the use of MESH repeaters.
DESCRIPTION
The WRM2 system provides a means of monitoring and supervising a group of different radiation monitors spread over a large area. Connects wireless devices (Wirless) to devices equipped with WRM2 transmitters and can display their status and measurements on a computer outside the radiological area.
CHARACTERISTICS
• Compatible with WRM2 base stations, MESH repeater, etc.
• Eliminates Crosstalk interference with several divers in the water at the same time
• Uses waterproof cable (AMP type)
• Antenna power is provided by the submerged repeater system (usually AC)
• Externally connected to the diver – does not interfere with the suit
• Available in 900 MHz or 2.4 GHz
• The antenna is water resistant up to a depth of 30m
DESCRIPTION
The WRM2 diving system from Mirion Technologies has long been the nuclear industry’s standard for remote monitoring of divers. It was originally composed of an iMUX, passive diving antenna and diving repeater.
The system allows radiation protection personnel the ability to track the doses collected (maximum eight positions on a diver).
The revolutionary Active Dive antenna relied on this functionality by offering its own WRM2 radio. In other words, the active system not only transfers the WRM2 signal via cable, but also provides a POWERFUL signal broadcast.
The Active Dive system is ideal for higher frequencies and longer cable lengths.
In addition, because each diver’s teledimetry data is broadcast on their own “closed loop”, radiation protection personnel can monitor several divers simultaneously without interference between divers.
Waterproof underwater antenna for transmitting data provided by electronic dosimeter in a diving environment.
CHARACTERISTICS
• Compatible with WRM2 base stations, MESH type repeater, etc.
• Eliminates Crosstalk interference with multiple divers who are in the water at the same time
• Uses waterproof cable (AMP type)
• Antenna power is provided by a submerged repeater.
• Externally connected to the diver – does not interfere with the suit
• Available in 900 MHz or 2.4 GHz
• The antenna is water resistant up to a depth of 30m
DESCRIPTION
The WRM2 diving system from Mirion Technologies has long been the nuclear industry’s standard for remote monitoring of divers. It was originally composed of an iMUX, passive diving antenna and diving repeater. The system allows radiation protection personnel the ability to track the doses collected (maximum eight positions on a diver).
The revolutionary Active Dive antenna relied on this functionality by offering its own WRM2 radio. In other words, the active system not only transfers the WRM2 signal via cable, but also provides a POWERFUL signal broadcast.
The Active Dive system is ideal for higher frequencies and longer cable lengths.
In addition, because each diver’s teledimetry data is broadcast on their own “closed loop”, radiation protection personnel can monitor several divers simultaneously without interference between divers.
A complete configuration software suite for the DMC series electronic dosimeter.
CHARACTERISTICS
• Management of dosimetric data
• Dosimeter customization (including for display) and configuration management
• Has the ability to configure a single dosimeter or a whole batch of dosimeters
• Access dosimeter history for in-depth incident analysis
• Testing the alarm characteristics of the dosimeters (audio / visual / vibration) before activation
• Possibility to record the history of the data provided by the dosimeter and save it.
DESCRIPTION
The DMCUser ™ platform is the accompanying software to support the management and operational maintenance of electronic dosimeters in commercial nuclear, defense, internal security and medical applications.
Allows complete customization, configuration, maintenance and diagnostics of any dosimeters belonging to the DMC / SOR product line. DMCUser software can be used with a wide range of Mirion products as an integrated dosimetry system.
The DosiServ dosimetry system is an integrated state-of-the-art dose management system.
CHARACTERISTICS
• Real-time access with the possibility of customizing the alarm threshold
• Tasks and task group management
• Management of the work permit for radiation
• Management of zones, subzones and group of zones
• Customization of access criteria for workers and companies
• Personalization of workers’ data
• It also works with the neutron module
• Management of protective equipment
• Automatic recovery of the dose received in case of interruption of communication with the readers.
DESCRIPTION
DOSISERV software is an individual and collective dosimetry management software. It is used for:
• Management of data on workers in the controlled area (marital status / companies / dose limits)
• Collection of data recorded by electronic dosimeters using dosimeter readers (also called “reading terminal”)
• Check access to the controlled area.
Dedicated dose management software suite for healthcare professionals.
CHARACTERISTICS
• Comply with new regulations
• Easy to use and intuitive interface
• Web access to essential information (tracking dosimetric data)
• Automatic EMAIL capabilities
• Integrated database
• Works under Windows
• Consulting workers’ data via the Web
• Standard LAPTOP or desktop PC platform
• Possibility to manage the remote reader
DESCRIPTION
DosiCare software easily enables operational management of dosimetry for healthcare professionals and small and medium-sized business personnel.
Now, under the new regulations, DosiCare software transfers individual dosimetric data, provides a secure web interface for viewing individual dosimetric summaries, and makes it possible to import dosimetric data from an Excel or .csv file.
Thanks to its easy-to-use and intuitive interface, DosiCare software provides better tracking of dosimetric activity, implementation of automatic alerts in case of exceeding alarm thresholds, tracking-comparison of cumulative doses and data transfer.
Allows mass configuration of multiple dosimeters and access to data recorded in the history of dosimeters.
CHARACTERISTICS
• LDM 320D and LDM 320W ™ units are compact and low cost dosimeter readers.
• Hands-free communication with dosimeters
• No directional alignment is required
• 3 indicator LEDs for operation and access control
• Managable digital inputs / outputs
• Digital process based on digital signal processor
• Compatible with DMC 2000 ™ and SOR families, iPAM-Tx, as well as DMC 3000 doz dosimeter
• Compatible with: DosiCare ™, DosiFFR ™, DMCUser ™ and LDM 3000SW software packages
• Wall or desk versions
• LDM320D: IP52 & LDM320W: IP30
DESCRIPTION
The LDM 320D and LDM 320W readers operate using software packages installed on the computer (PC) and communicate with the DMC 3000 dosimeter and the DMC 2000 and SOR families in hands-free mode.
When used with DosiCare, DosiFFR software, or compatible access control software, the LDM 320 reader is used as an interface to activate a dosimeter (to switch to counting mode) or to turn it off (to switch to pause mode).
When used with DMC User software, it functions as an interface for parameterizing DMC 3000, SOR and DMC 2000 dosimeters.
A robust electronic dosimeter reader used to enter and exit radiologically controlled areas.
CHARACTERISTICS
• Connection to the dosing system via TCP / IP network
• Local emergency mode in case of network unavailability (capacity of 2000 incoming / outgoing transactions)
• Guidance for workers throughout the area access protocol (configurable steps)
• Hands-free mode – how to configure the dosimeter with protective overalls
• Downloadable configuration
• Optional dedicated barcode reader or security badge reader can be connected to identify the worker during the entry protocol
• Digital inputs and outputs that allow control of access control devices (turnstiles / body monitor)
DESCRIPTION
LDM 2000 is a robust electronic dosimeter reader used to enter and exit radiologically controlled areas. The reader is operated by a dosimetry system to program the appropriate dosimeter alarm setting points and to take the dose at the time of “exit”. It can be connected to access control devices, such as turnstiles.
The optional barcode reader allows inputs from the worker (identification, legal dosimeter).
